Embedded Files
The visualizations are created in a folder. To see the visualization you need to click on the folder in the app or the desktop interface.
Create visualisation
Create visualisation
Proceed as follows to create a visualisation:
Log in to the smart-me website.
Click on Configuration in the top right-hand corner
Click on Counter / Folder Configuration
Select the folder on which the visualisation is to be created.
Click on Edit next to Visualisation.
Select the desired visualisation and insert the corresponding counters.
Visualizations
Visualizations
This is an overview of various possible visualisations. The list is not final.
Energy Flow (simple)
Energy Flow (simple)
Shows the energy flow for a solar system, mains supply and household consumption.
Two of these three meters must be specified, the third is calculated automatically. If all three meters are specified, this may result in incorrect readings. We always recommend specifying direct measurements whenever possible and not virtual meters
House with multiple producers and consumers
House with multiple producers and consumers
Up to ten consumers or producers can be visualised for a building.
You can choose to display the performance (now) or the consumption values for the last 30 or 365 days.
Consumption of a flat with comparison to a reference flat
Consumption of a flat with comparison to a reference flat
The current performance of a flat (electricity, heat and water) is displayed.
For the historical consumption values, a comparison to a reference flat is also displayed (e.g. "10% less electricity consumed than the average").
Own Consumption and Self-Sufficiency
Own Consumption and Self-Sufficiency
It shows the self-consumption level and level of autonomy of a building. The values are calculated from the PV meter and the balance meter.
Own consumption rate: How much of the solar energy is consumed directly in the house
Self-Sufficiency: How much of the total consumption is produced by the solar system.
Attention: The main counter must not be a virtual counter!
Production and consumption monitoring
Production and consumption monitoring
Shows where the produced energy is used (in-house or exported to the grid) and from where the consumed energy come from (solar or from grid)
This is clearly shown as a percentage figure and as a graphic.
Attention: The main counter must not be a virtual counter!
Public Links
Public Links
With the Limited or Professional subscription to smart-me, you can use a Public Link to display the performance and/or meter reading of any metering point or folder from your smart-me metering infrastructure in real time on a homepage of your choice.
To do this, click on Configuration in the top right-hand corner of the smart-me portal, then select the Public links tile.
On the interface that now appears, you can use the Add button to specify the name of your public link and select the desired meter point and display format. This will then generate the HTML code which you can embed on your chosen website. Insert it using copy and paste.
Page updated
Report abuse