Single Phase Meter 80 A
The smart-meter is the first electric meter which can be analyzed and controlled from anywhere. No additional hardware is needed. The meter makes use of the existing Wi-Fi network and connects directly to the smart-me Cloud.
Encrypted real-time data connection to the smart-me cloud
Intelligent control with if/then actions
Event actions (switching without internet connection)
Floating contact outputs for controlling external devices, one of them with 8A relay
Floating contact input for tariff signal or digital input
Easy installation with the free smart-me app.
Operating voltage: 85 - 253 VAC
Reference current Iref(Imax): 5 (80) A
Frequency: 50/60 Hz
Product certification: CE
Power consumption: < 0.8 W
Measuring range: 0.5 -18'400 W (80A)
Accuracy class: 1 % (over the entire measuring range) Class 1 according to EN 50470-1 (IEC62053-21)
Type of meter: Bi-directional meter (purchase and supply)
Measured values: Active energy (kWh), active power (kW), current (A), voltage (V), power factor (cosphi)
Tariffs: Two via digital tariff input or use of virtual tariffs
Digital input E1: Floating* input, tariff input, 25V - 253V AC/DC
Digital output / pulse output S0: Floating*, Opto Power MOSFET, 5-48VDC / 5- 230 VAC, max. 550mW
*does not have its own power supply.
WiFi standard: 802.11 b / g / n
WiFi security standard: WEP, WPA, WPA2 (Personal)
S0 Pulse valency: 1'000 Imp/kWh (configurable to 10'000 Imp/kWh)
Data memory: 2 months
Temperature range: -40 to +70 °C
EMC measurement: EN 61000-6-2
Interference immunity: EN 61000-6-3
IP class: IP 20
Dimensions: 2 module, 36 x 90 mm
Mounting: DIN rail
Server location: Switzerland
Internet connection: < 0.1 Mbit/s
Configuring inputs and outputs
The smart-me meter has one output and one input, which can be used as pulse input and output or as a switchable potential-free contact. Details can be found here.
The counter alternately displays different values.
"So XXXX" is the installed software version.
"CH XXXX" is the software checksum.
"Number + T1/T2" is the respective tariff value.
"Er XX" is an error code.
Dimensions and Wiring
T1 Button for installation
E1 Tariff switching
0V Tariff 1
>25V Tariff 2
S0 Impulse output (potential-free contact)
Downloads and certificate of conformity
Here you will find data sheets, quick starter guides and other documentation for this product.