Swisseldex SDAT data import

Measurement data import for energy suppliers' metering points

The measurement data of the relevant metering points can be imported via the Swisseldex data hub. Smart-me is listed as a recipient of this data at Swisseldex 

The data is sent by the energy suppliers to the smart-me import data hub via Swisseldex following a request and approval. The data can then be managed, visualized and billed in the respective smart-me account.

Properties of the energy supplier data:

• EBIX, SDAT data format

• 15-minute resolution

• Provision approx. every 24 hours unverified

• Provision verified approx. every 30 days

Set up import into the target account

The request and release of the relevant measuring points must be requested from the energy supplier. These are then made available to smart-me AG on Swisseldex and the measuring point is transmitted by the energy supplier with its unique measuring point ID. The ID consists of a CH code and a 33-digit number. Beispiel: CH637482974368378932BKL7389576492

1. Log into your vZEV or ZEV account at www.smart-me.com .

2. Call up the import area of your vZEV or ZEV account via https://ftp.portal.smart-me.com/.

3. Accept the access authorizations

4. Navigate to the measuring points area

5. Add all CH numbers provided to you as measuring points.

6. Once the measuring point data has been imported, the measuring points are visible in the meter configuration to add them to the structure.