Cloud License

Note that the Professional status of the account is only achieved if each measuring point has an equivalent licence.

Basic

Standard for API, OCPP and M-Bus meters

M-Bus Gateway

---

Reports: manual CSV export

1 measurement value per 15 minutes (API)

API: private use and control only**

Limited

Standard for

Single Phase Meter

3-Phase Meter Telstar 

3-Phase Meter Telstar CT 

Kamstrup Module (discontinued)

Pico EV Charging Station

---

If/then actions

Reports

Load profile

Advanced folders and meter administration

Public Links

1 measurement value per minute (API)

API: private use and control only**

Professional*

Available for all measuring points in the smart-me cloud

---

Billing tool

Virtual Meters 

Auto Export 

Creating Users 

Pico dynamic load management 

oAuth

If/then actions

Reports

Load profile

Advanced folders and meter administration

Public Links

Modbus TCP 

1 measurement value per second (API)

API: for private and commercial use

Dynamic load management

*The respective account status is only achieved if each metering point in the account has the same licence level.

** Commercial use of the API always requires the Professional subscription level

Professional = All meters in the account have a Professional licence.

The meter with the lowest status in the account determines the overall account status. Mixed accounts are impossible and remain in Basic or Limited status if the number of licences is insufficient.

Calculate the needed amount of professional licenses

That your account state reaches the professional state you need an equal license for each installed counter.

It is impossible to have licensed counters and unlicensed counter within the same account.


Usual rule:

Association of self-consumption with 1x photovoltaic system: Counter count + 1 (virtual)

Association of self-consumption with >1x photovoltaic system: Counter count + 2 (virtual)

Example electrical energy with smart-me energy counters
(1x photvoltaic)

3x Telstar 80A
2x Telstar CT
1x virtual counter (summ of loads)

Professional licenses All-Energy: 6 pcs

Example electrical energy with smart-me energy counters and heat / water with installed M-Bus gateway (1x photvoltaic)

3x Telstar 80A
2x Telstar CT
1x virtual counter (summ of loads)

Professional licenses All-Energy: 6 pcs

1x M-Bus gateway with connected heat / water counters

3x heat
3x cold
3x hot water
3x cold water

Professional licenses for heat/water/gas: 12 pcs

Total Professional licenses: 18 pcs

Hint: the smart-me M-Bus gateway itself does not need a license.

Licence fulfilment

The installation described above with mixed energy types can now be licenced in two ways..

Monthly subscriptioon

The installation requires 18 Professional licences.

These can be purchased for a monthly fee and cover all energy types at all times.

The monthly subscription is subject to inflation and deflation effects.

Multi-year licence model

The installation requires 18 Professional licences in total.

The multi-year licences are cheaper on average and are not subject to inflation or deflation effects during the period of use.

Are you a customer with need of "Professional" account state?

With the pictures below you can easily find out if you are a professional user or not. 

System-Billing

In the billing part it decides mainly if you wish automatic data transport or which tariff system you prefer.

System-Control