Embedded Files
Important note:
None of these accessories is supplied by smart-me, please follow the links to order from the certain distributors or manufacturers.
Below you will find a list of product and service suggestions. smart-me does not earn any money with the recommended products and does not guarantee them. It is always possible to use other products. Care must always be taken to ensure that these meet the requirements of the respective product, in this case the 3-Phase Meter Telstar CT.
The goal of the suggestions is to offer our partners the possibility to easily and efficiently find certain products or services, if there are no known ones yet.
Current transformers calibrated for billing purposes
Current transformers calibrated for billing purposes
If the meters are to be used for billing purposes, calibrated transformers are required that meet at least class 0.5 or smaller.
Pfiffner transformers (calibrated)
Pfiffner transformers (calibrated)
Country of distribution: Switzerland
Purpose: Billing
Type: Calibrated closed current transformer
Source: https://www.pfiffner-group.com
Pfiffner TGH1 / TGK1 Series
Pfiffner TSC 1-8 Series
Ordering and information:
Pfiffner instrument transformers direct
Contact Pfiffner: Mr. Samuel GloorEmail: msns@pmw.ch
Tel: +41 62 739 29 19
Calibration for billing:The calibration must be asked when ordered to ensure they will carry the certificate.
Hager transformers (calibrated)
Hager transformers (calibrated)
Country of distribution: Switzerland
Purpose: Billing
Type: Calibrated closed current transformer
Source: https://hager.com/
Hager 300K05G
Hager 600K05G
Ordering and information:
Hager direkt
Contact : emmenbrueke@hager.com
Tel: +41 41 269 90 00
Calibration for billing:The calibration must be asked when ordered to ensure they will carry the certificate.
Redur transformers (calibrated)
Redur transformers (calibrated)
Country of distribution: Germany
Purpose: Billing
Type: Calibrated closed current transformer
Source: https://www.redur.de/
Redur Regulus Series
Current transformers for monitoring purposes
Current transformers for monitoring purposes
Optec Klapp-Wandler
Optec Klapp-Wandler
Country of distribution: Switzerland
Purpose: Monitoring
Type: open current transformer
Source:
Vertriebsland: Schweiz
Verwendungszweck: Monitoring
Typ: Open current transformer
Source: https://www.optec.ch
Optec RX- Serien offene
Optec KUW-Serien (Klapp)
Optec SC-CT-Serien (Klapp)
Possible place to order:
Optec Online Shop
Optec Stromsensoren
Optec Stromsensoren
Country of distribution: Switzerland
Purpose: Monitoring
Type:closed current transformer
Source:https://www.optec.ch
Optec RX-Serien geschlossen
Possible place to order:
Optec Online Shop
Redur Messwandler
Redur Messwandler
Country of distribution: Germany
Purpose: Monitoring
Typ: closed current transformer
Source: https://www.redur.de/
Redur Regulus Series
Redur Messwandler
Redur Messwandler
Country of distribution: Germany
Purpose: Monitoring
Typ: open current transformer
Source: https://www.redur.de/
Redur RSC Series
CT Disconnect Terminals
CT Disconnect Terminals
In order to easily replace a meter, even in operation, instrument transformer disconnect terminals can be used. These offer the possibility to short-circuit the transformer outputs in order not to damage the transformer when changing the meter.
Phoenix Trennklemmen
Phoenix Trennklemmen
Type: DIN mounting
Source: www.phoenixcontact.com
Phoenix Contact PTME 4
Possible place to order:
Phoenix Contacts
Page updated
Report abuse