Integration manual

Connect the gateway to the smart-me cloud

1. Supply the device with power.

2. Connect your laptop to the wifi of the Milesight UG56 (Gateway_*******) no password required.wifi password: iotpassword

3. Open your web browser and visit 192.168.1.1

4. Log in.
   username: admin
   password: password

5. Navigate to “Packet Forwarder” and copy the EUI of the device for later implementation in smart-me.

6. Create a new destination with:
   Type: Semtech
   Server address: lora-gateway.smart-me.com
   Port Up: 1700
   Port Down: 1700

7. Save the setting

8. Register the device with its EUI in the smart-me LoRa gateway

Note: Reconnecting to the web interface via the access point only works if the Ethernet is not connected.